Derivan / Projects / Printing Projects / Screen Print Flower Project

SCREEN PRINT REPEAT FLOWER Project

 
Finalimage.jpg
 
 
 

You will need

Flower template Design Download load 

• Derivan Screen Ink

Fluro Blue, Mid Yellow & Brilliant Pink

• Box cutter 

• Cutting Matt

• Roll of contact paper 

• A piece of cotton fabric

• A4 blank screen printing screen

• Palette knife 

• 20cm squeegee  



 
 
STEP1.jpg

STEP 1

Download, flower design, (link above) now using a permanent marker trace design onto an a4 sized piece of contact.

Tip: Place the flower design in the middle of the sheet.

 
 
 
STEP2.jpg

STEP 2

With a box cutter cut out the traced image.

 
 
 
STEP3.jpg

STEP 3

Adhere the contact paper to the bottom of the screen (on the non-recessed side).

 
 
 
STEP4.jpg

STEP 4

Place your fabric down flat onto an even surface. 

Hot Tip: put some newspaper down to protect the surface from paint

With a palette knife place a scoop of Fluro Blue Derivan Screen Ink onto the top of the design. Now put squeegee your squeegee at a 45-degree angle and drag the paint across the screen.

 
 
 
STEP5.jpg

STEP 5

Slowly put the screen off the fabric to reveal your print. Check the underside of the screen and check there is no ink residue if needed clean the outer screen with a damp cloth. Once clean place the screen in a different area of the fabric and repeat until you have the desired amount of blue flowers.

 
 
 
STEP6.jpg

STEP 6

Clean the screen under the tap and dry fully 

before started with a new colour.

Continue with colours Mid Yellow & and Brilliant Pink

*Hot tip if you overlap the flowers with different colours you will achieve extra tones in your design - notice on our final design where the yellow overlaps the blue you get green and where the brilliant pink is over the blue you get purple